QLOGIC QLA2342 Fiber Adapters
QLOGIC QLA2342 Fiber Fibre Channel Adapters
Numéro d'article: 006530
Description du produit
| Host Bus Interface Specifications | |
| Speed | 64-bit, 133-MHz PCI-X |
| Signal voltage | 3.3 V and 5.0 V buses supported |
| Compliance | PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification rev. 1.0, PCI Bus Power Management Interface Specification rev 1.1 |
| Fibre Channel Specifications | |
| Speed | 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex |
| Topology | FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port) |
| Buffer credits | For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued. |
| Class of service | Class 3 Fibre Channel service |
| Protocols | SCSI-FCP, IP, FC-TAPE |
| Compliance | Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS) |
| Physical Specifications | |
| Ports | Two |
| Media | Multimode optic |
| Optics | Short wave laser |
| Connectors | Two LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module |
| Form factor | Low-profile MD2: 16.93 cm×5.15 cm (6.7"×2.5") |
| Bracket size | QLA2342: standard size; QLA2342L: low-profile size |
| Environment and Equipment Specifications | |
| Temperature | Operating: 0°C/32°F to 55°C/131°F. Storage: –20°C/–4°F to 70°C/158°F |
| Airflow | 0 lf/m |
| Humidity | Relative (noncondensing): 10% to 90%, Storage: 5% to 95% |
| Power dissipation | ~ 7.0 watts |
| Cable | 50/125μm multimode fiber, 62.5/125 μm multimode fiber |
| Cable distances | 1 Gbps: 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber 2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber |