QLOGIC QLA2342 Fiber Adapters

Imprimer
QLOGIC QLA2342 Fiber Fibre Channel Adapters
Numéro d'article: 006530
Description du produit
Host Bus Interface Specifications
Speed 64-bit, 133-MHz PCI-X
Signal voltage 3.3 V and 5.0 V buses supported
Compliance PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification rev. 1.0, PCI Bus Power Management Interface Specification rev 1.1
Fibre Channel Specifications
Speed 200 MBps maximum at half-duplex, 400 MBps maximum at full-duplex
Topology FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Buffer credits For 512-byte frame size, 9 credits issued. For 2K-byte frame size, 3 credits issued.
Class of service Class 3 Fibre Channel service
Protocols SCSI-FCP, IP, FC-TAPE
Compliance Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Physical Specifications
Ports Two
Media Multimode optic
Optics Short wave laser
Connectors Two LC-style connector that supports non-OFC, multimode fibre optic cabling using a small form factor optical transceiver module
Form factor Low-profile MD2: 16.93 cm×5.15 cm (6.7"×2.5")
Bracket size QLA2342: standard size; QLA2342L: low-profile size
Environment and Equipment Specifications
Temperature Operating: 0°C/32°F to 55°C/131°F. Storage: –20°C/–4°F to 70°C/158°F
Airflow 0 lf/m
Humidity Relative (noncondensing): 10% to 90%, Storage: 5% to 95%
Power dissipation ~ 7.0 watts
Cable 50/125μm multimode fiber, 62.5/125 μm multimode fiber
Cable distances 1 Gbps: 500 meters 50/125 μm fiber, 300 meters 62.5/125 μm fiber 2 Gbps: 300 meters 50/125 μm fiber, 150 meters 62.5/125 μm fiber